В программе пишет вот что:
===============================================
---==== BF5xx second stage bootloader ====---
v2.09 Build 198
2Mb FLASH version
===============================================
Boot request...
Boot mode : 'Normal'
Load module <LOADABLE-FIRMWARE>
Secure load.
Decrypt...
Inflate...
Object size : 201568(Original:326552)
Download time : 402.331ms
Object CRC : 0xF31A2D8F
DSLIP Enabled.
Detecting BVS type...
D800 BVS found. 2 colors in 2D-channels available
Color mode selection NOT available in 2-color D800. Always 2 colors enabled.
EEPROM data inited:coeffs, maxes, flags,prelim_expos
Busy message length: 184
notebase protection enabled
<<<< CLEAN MAGNET TRACKS >>>>
-----------------------------------
Device type: D800
BVS: v0.1.213
Hardware: v0.1.224
NoteBase: v0.14.241
Build date: <Jul 10 2020>
Build time: <15:24:39>
-----------------------------------
SWRST = 0x0000
Module restart on exception: ENABLED
SPI DMAWidth=8
StringSize=60
SPI acc_data=0xFF907EAC
SPI buf_data=0xFF907EE8
sc[0]:
dma_config=0x000000a2
dma_x_count=60
dma_start_adr=0xff907ee8
SPI Scanner[0] is READY
1D_channel[0].track_num=4
1D_channel[1].track_num=2
1D_channel[2].track_num=2
1D_channel[3].track_num=2
1D_channel[4].track_num=2
1D_channel[5].track_num=4
D800 Scanner is successfully inited
WRONG CALIBR data in EEPROM.
EEPROM data inited:coeffs, maxes, flags,prelim_expos
init_done
Set lprintf () level to: 1001
String processing OFF
----------------------------------------
Heap remaining space: 14.730 Mb.
----------------------------------------
